SECOIN Encaustic Cement Tiles have been certified to conform to the Standard for Cement Tiles code TCVN 6065:1995. Certificate Number SP1616.15.15 issued by Vietnam Certification Centre (QUACERT) on 21 January 2015 and valid until 20 January 2018 (to be enclosed with this document).
SECOIN Encaustic Cement Tiles meet or exceed the technical specification required by TCVN 6065:1995.
Below is an excerpt of technical requirements from the Standard:
4.1. Surface of tiles has a layer with one colour or multi-colour patterns. Surface of plain colour tiles must be equal and homogeneous. Patterned tiles must have sharp lines and not blurred. Minimum thickness of decorative layer is not less than 2.5mm.
4.2. Surface of tiles must be flat and without scratches. Corners must be square, edges must be without flashes. Depending on acceptable defects on appearance, cement floor tiles shall be divided into two grades as given in table 1:
4.3. Both first and second grades of cement floor tiles must meet physical standards as following table 2: