Care Maintenance

To preserve the long-lasting beauty of your Secoin terrazzo floor, proper maintenance is essential. Although terrazzo requires minimal care, consistent maintenance is critical to protect its surface and appearance. This guide outlines key steps and best practices for maintaining your terrazzo tiles effectively.

Our terrazzo tiles are manufactured with a built-in protective sealer mixed directly into the color layer during production. This integrated sealer offers long-term protection while allowing the tiles to breathe. Additionally, a surface coating is applied during production to help protect the tiles during installation. After the flooring is installed, we strongly recommend applying a surface sealer to enhance protection and achieve the desired shine and polish.

The care and maintenance of your terrazzo floor depend on the level of foot traffic it receives. Always use pH-neutral cleaning products, as acidic or alkaline substances can damage the terrazzo surface.

Ensure mops, brooms, and buckets are clean before use. Dirty tools can act as abrasives and scratch the surface. Apply multiple coats of sealer until the desired gloss is achieved, and monitor how long the polish lasts based on traffic patterns. This will help determine how frequently to reapply a topcoat.

Below is a sample schedule that can be tailored to your building’s traffic level:

Initial Treatment:

– Strip any temporary protective sealer from construction.
– Apply two coats of a water-based base sealer.
– Follow with at least two coats of finish sealer polish.
– Apply additional coats if higher gloss is desired.
– Always follow the manufacturer’s instructions.

Daily:

– Sweep or vacuum the floor.
– Spot clean stains with a neutral cleaner diluted in warm water.

Weekly:

– Damp mop lightly soiled areas with a neutral cleaner.
– Use a buffing machine and neutral cleaner for heavily soiled areas.
– Rinse and dry the surface before mechanically buffing.

Monthly:

– Apply a topcoat of sealer to restore gloss and protection.
– After 24 hours, buff the floor with a white pad if needed.

Annually:

– Strip all existing polish and sealer.
– Reapply sealer as per initial treatment instructions.

Do:

– Sweep or vacuum daily to remove grit.
– Use maintenance products specifically designed for terrazzo.
– Work with cleaning professionals experienced in terrazzo care.
– Seek advice if you’re unsure about a cleaning procedure.
– Monitor sealer condition and adjust reapplication frequency as needed.
– Wipe up spills immediately to prevent staining.
– Buff your floor as needed with a white pad to maintain shine.

Don’t:

– Don’t use general-purpose cleaners with acids, alkalis, or salts.
– Don’t experiment with untested cleaners or sealers.
– Don’t neglect maintenance – this may lead to costly repairs or replacement.
– Don’t use dirty mops or buckets that can spread dirt across the floor.

If you need further assistance, please contact Secoin at: contact@secoin.com